Player Models

595 files

1. 

   Deuces Wild VM Pack 1

   By neomarz1

   Luminara as seen in Episode2... New version with cape, plus improved skin.
    
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   First remove any other version of Luminara that you may already have... Next place Luminara.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn luminara.
    
   Here are the npc model names for this model...
    
   For Playermodel: luminara
   For Side Kick support: luminara
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn luminara.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: luminara
   For Side Kick support: luminara
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   953 downloads

      (5 reviews)

   1 comment

   Submitted June 23, 2012

2. 

   Deuces Wild VM Pack 2

   By neomarz1

   Basically this is my own creation of a female Mandalorian. I call her Sintra Messon. Basically I was watching G4.TV and they were covering a StarWars festival. There was a girl dressed up as a black Mandalorian. This pretty much spiked my interest.
    
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   Place FemSintra.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn sintra.
    
   Here are the npc model names for this model...
    
   For Playermodel: sintra
   For Side Kick support: sintra
   For Non helmet version: sintras
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn sintra.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: sintra
   For Side Kick support: sintra
   For Non helmet version: sintras
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   1,032 downloads

      (7 reviews)

   1 comment

   Submitted June 23, 2012

3. 

   Deuces Wild VM Pack 3

   By neomarz1

   ShaakTi as seen in Episode2
    
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   First remove any other version of FemShaakTi that you may already have... Next place FemShaakTi.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn shaakti.
    
   Here are the npc model names for this model...
    
   For Playermodel: shaakti
   For Side Kick support: shaakti
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn shaakti.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: shaakti
   For Side Kick support: shaakti
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   815 downloads

      (3 reviews)

   0 comments

   Submitted June 23, 2012

4. 

   Bobble Heads Pack VM

   By neomarz1

   This Model Pack was something I decided to do this weekend. It's a tribute to all of you who have supported me. I was amazed at all the people who came out and showed thier appreciation of my work... I want you all to know, I am sincerely touched. I have read all the forums, and not a comment goes by me. Thanks to all of you! I will probably return sometime in the future. Marzout!
   I wanted to make something that would bring a smile... Too often people take these models way to seriously. I'm not afraid to poke fun at my own models... So please dont tell me the head is out of proportioin to the body. This time I meant to do it!!!!
   To be honest I am having so much fun converting my models to Bobble heads, It brings a fun aspect to the game. Here is Bobble Head Vader, Bobble Anakin, Bobble Obi, Bobble Maul.
    
   Note: You may want to replace the older version of BobbleVader with the new one in the pack. I made some fixes.
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   Now I have all the pk3 files separated in the zip, so you only need to place the ones you want. If you want them all then place N_BobbleVader, N_BobbleAnakin, N_BobbleObi, and N_Bobbble Maul.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
   Team Support:yes
   Bot Support: Yes
   NPC Support: yes
   Sounds: Yes.... But you need the original models, maulvm, and anakinvm, to access the sound files.
    
    
    
    
    
   ***How to use:***
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn bobblevader.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For NPC: bobblevader
   bobbleobi
   bobbleanakin
   bobblemaul
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   195 downloads

      (3 reviews)

   0 comments

   Submitted June 23, 2012

5. 

   Aayla Secura VM

   By neomarz1

   Ayla Secura as seen in Episode III, and Dark horse comics.
    
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   First remove any other version of AaylaSecura that you may already have... Next place FemAayla2.0.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn aayla.
    
   Here are the npc model names for this model...
    
   For Playermodel: aayla
   For Side Kick support: aayla
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn aayla... Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: aayla
   For Side Kick support: aayla
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   888 downloads

      (7 reviews)

   1 comment

   Submitted June 23, 2012

6. 

   Darth Vader VM - Episode III

   By neomarz1

   This is Vader as seen in Episode III. This model will "not" overwrite any other NeoMarz Vader models, so dont worry if you should want to keep them. So what's new? Well Tweaked model, Tweaked skins, New Shaders (more accurate metal effect), Glowing ChestBox lights. I decided to go back to the original cape.
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   Place VaderEo3.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn vadervmm.
    
   Here are the npc model names for this model...
    
   For Playermodel: vadersingle
   For side kick: vadersingle
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn vadervmm.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: vadersingle
   For side kick: vadersingle
    
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
    
   Team Colors: Yes
   Bot Support: Yes
   NPC Support: Yes
   

   6,578 downloads

      (7 reviews)

   4 comments

   Updated June 25, 2012

7. 

   Younglings VM

   By neomarz1

   This is a model of the jedi "younglings" as seen in starwars episode 2 and 3.
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   Place Youngling.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn youngling.
    
   Here are the npc model names for this model...
    
   For Playermodel: youngling
   For side kick: youngling
   For Mace Windu youngling: macekid
   For Asian Boy youngling: azekid
   For female youngling: youngfem
   For Bultar Swan youngling: babyswan
   For Shaak Ti youngling: youngshak
    
   There is one Secret Skin... youll have to find
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn youngling.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: youngling
   For side kick: youngling
   For Mace Windu youngling: macekid
   For Asian Boy youngling: azekid
   For female youngling: youngfem
   For Bultar Swan youngling: babyswan
   For Shaak Ti youngling: youngshak
    
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   1,683 downloads

      (9 reviews)

   3 comments

   Submitted June 23, 2012

8. 

   Yoda VM

   By neomarz1

   This is a totally new model of Yoda! I went for making an accurate build for this model. Considering the limitations of the JKA skelaton, I think the model works well. The model has been scaled, but yoda is only scaled when spawned as an NPC, or used as a player model in single player. Hopefully someone will add it to the script files for "JK Plus Mod".
    
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   Place YodaVM.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
    
   Instructions:
   1) In order to use NPC's you will need to acivate cheats heres how you do it.
    
   Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn yodavm.
    
   Here are the npc model names for this model...
    
   For Playermodel: yodavm (type "playermodel yodavm" in console for single player)
   For Side Kick support: yodavm
   For Episode 5: yodaoz
   For Episode 2: yodaepit
   For Episode 3: yodavm
   For refugee Yoda: yodapack
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
    
    
   Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn yodavm.. Notice that single player you have to put the "/" slash before the command.
    
   Here are the npc model names for this pack (With a brief description)...
    
   Here are the npc model names for this model...
    
   For Playermodel: yodavm (type "playermodel yodavm" in console for single player)
   For Side Kick support: yodavm
   For Episode 5: yodaoz
   For Episode 2: yodaepit
   For Episode 3: yodavm
   For refugee Yoda: yodapack
    
   Note: you must enter one of the above names when spawning your npc.
    
   cont... close the console by hitting the tild (~) again.
   

   3,738 downloads

      (4 reviews)

   6 comments

   Submitted June 23, 2012

9. 

   Clones Ultima VM

   By neomarz1

   This model pack contains just about every clone varient shown in Episode II, and III.
    
   *********Important Note...READ FIRST!!!!!!**********
   Not all varients are on the main selection page, some are located on red or blue team selection. Other varients have to be spawned using the "console command" (see below).
   The reason for this is so that the clones do not take all your character slots up.
    
    
    
   ******************************READ THIS BEFORE PLAYING***************************************
    
   Installation:
    
   Place ZClonesUltima.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
    
    
   Instructions:
    
   To access extra clone varients:
   Open up the command console while pushing the shift and ~ (tild) keys together, then enter either of these commandlines to access the extra varients.
   model cloneclassic/yellowclone
   model cloneclassic/greenclone
   model cloneclassic/purpleclone
   model cloneultarck/commander
    
   Episode III extra varients:
    
   model clonesultima/sky
   model clonesultima/212
   model clonesultima/default
   model clonesultima/dirty
   model clonesultima/41st
   model clonesultima/default_gree
    
   model clonesultima/default_bly
   model clonesultima/default_deviss
   model clonesultima/327th
   

   2,367 downloads

      (8 reviews)

   0 comments

   Submitted June 23, 2012

10. 

    MagnaGuard VM

    By neomarz1

    Magna Guard... The elite battle droids of Genera Grievous as seen in Star Wars Episode III.
     
    Fixes in Beta... added icon for headless version. fixed shader files.
     
     
    ******************************READ THIS BEFORE PLAYING***************************************
     
    Installation:
     
    Place ZMagnaVM.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder". Make sure you have added the electostaff (included in the zip) file as well. This will allow the bots to be supported correctly.
     
    Weapon Install: If you want the bots to use the electrostaff, then you will need to install the electrostaff.pk3 to the same directory as listed above.
    If you already have Hatrus's electrostaff installed, then you may want to replace it with mine, so that the bots use the purple colored staff.
     
     
    Instructions:
    1) In order to use NPC's you will need to acivate cheats heres how you do it.
     
    Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn magnaguard.
     
    Here are the npc model names for this model...
     
    For Enemy: magnaguard
     
    Note: you must enter one of the above names when spawning your npc.
     
    cont... close the console by hitting the tild (~) again.
     
    To change playermodel: Open up the command console while pushing the shift and ~ (tild) keys together, then enter this commandline.
    model magnaguard
     
     
    Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn magnaguard.. Notice that single player you have to put the "/" slash before the command.
     
    Here are the npc model names for this pack (With a brief description)...
     
    Here are the npc model names for this model...
     
    For Enemy: magnaguard
     
    Note: you must enter one of the above names when spawning your npc.
     
    cont... close the console by hitting the tild (~) again.
    

    3,075 downloads

       (7 reviews)

    0 comments

    Submitted June 23, 2012

11. 

    Delta Commandos VM

    By neomarz1

    Delta Force Republic Commandos. Characters Boss, Fixer, Sev, and Scorch.
     
     
    ******************************READ THIS BEFORE PLAYING***************************************
     
    Installation:
     
    This pack can safely be loaded with the ultmateclones pack, and does not overwrite any files. Place Zclonedelta.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
     
     
    Instructions:
    1) In order to use NPC's you will need to acivate cheats heres how you do it.
     
    Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn commando_boss.
     
    Here are the npc model names for this model...
     
    For Enemy: commando_boss
    commando_fixer
    commando_sev
    commando_scorch
     
    Note: you must enter one of the above names when spawning your npc.
     
    cont... close the console by hitting the tild (~) again.
     
    To change playermodel: Open up the command console while pushing the shift and ~ (tild) keys together, then enter this commandline.
    model clonedelta/default_boss
    model clonedelta/default_fixer
    model clonedelta/default_sev
    model clonedelta/default_scorch
    model clonedelta/blue
     
    For helmetless versions
    model clonedelta/default_fboss
    model clonedelta/default_ffixer
    model clonedelta/default_fsev
    model clonedelta/default_fscorch
     
     
    Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn commando_boss.. Notice that single player you have to put the "/" slash before the command.
     
    Here are the npc model names for this pack (With a brief description)...
     
    Here are the npc model names for this model...
     
    For Enemy: commando_boss
    commando_fixer
    commando_sev
    commando_scorch
     
    Note: you must enter one of the above names when spawning your npc.
     
    cont... close the console by hitting the tild (~) again.
     
    To change playermodel: Open up the command console while pushing the shift and ~ (tild) keys together, then enter this commandline.
    model clonedelta/default_boss
    model clonedelta/default_fixer
    model clonedelta/default_sev
    model clonedelta/default_scorch
    model clonedelta/blue
    

    1,259 downloads

       (4 reviews)

    1 comment

    Submitted June 23, 2012

12. 

    Jango / Boba VM

    By neomarz1

    Jango, and Boba Fett bounty hunters from the StarWars Universe.
     
     
    ******************************READ THIS BEFORE PLAYING***************************************
     
    Installation:
     
    Place Zclonemando.pk3 into the "StarWars JediKnight Jedi Academy/GameData/basefolder".
     
     
    Instructions:
    1) In order to use NPC's you will need to acivate cheats heres how you do it.
     
    Singleplayer- Once your in the game, hit "shift and tild (~)" to activate the console. Next type "devmapall" (or devmap t1sour)...hit enter (cheats are now on)...next type "npc spawn (the npc's name)" Example: npc spawn jangovm.
     
    Here are the npc model names for this model...
     
    For Enemy: jangokamino (jango with pack as seen in kamino)
    jangovm (jango with standard jetpack)
    bobavm
     
    Note: you must enter one of the above names when spawning your npc.
     
    cont... close the console by hitting the tild (~) again.
     
     
    ***Special Note for JK Plus users***
    You may want to use the packless versions, so that JK Plus jetpack will be rendered by itself. If you use the other versions, you will have two jet packs at the same time (which looks rather ugly).
    To use the packless versions: Open up the command console while pushing the shift and ~ (tild) keys together, then enter this commandline.
    model clonemando/default_jangonopac
    model clonemando/default_bobanopac
     
     
    To change playermodel: Open up the command console while pushing the shift and ~ (tild) keys together, then enter this commandline.
    model clonemando/default
    model clonemando/default_jangohelm
    model clonemando/default_jangopilot
    model clonemando/default_kamino
    model clonemando/default_bobahelm
     
    Multiplayer- To activate cheats, you do thing a little different. activate the console by hitting shift+tild(~). Next type /devmapall "mapname". Example: /devmapall mp/duel1. The map will load with cheats activated. Open the console again and type /npc spawn "npc's name". Example: /npc spawn jangovm.. Notice that single player you have to put the "/" slash before the command.
     
    Here are the npc model names for this pack (With a brief description)...
     
    Here are the npc model names for this model...
     
    For Enemy: jangokamino (jango with pack as seen in kamino)
    jangovm (jango with standard jetpack)
    bobavm
     
    Note: you must enter one of the above names when spawning your npc.
     
    cont... close the console by hitting the tild (~) again.
    

    2,164 downloads

       (4 reviews)

    3 comments

    Submitted June 23, 2012

13. 

    Mario Bros.

    By IG-64

    Thank you for downloading these models, I hope you enjoy them, I spent alot of time on them.
     
    To install, put the pk3 file in your base folder.
     
    JUSTICE TO MARIO, my in-game name is =GoW=Game&Watch, and yes, I will be releasing a Game & Watch model soon.
    

    2,114 downloads

       (3 reviews)

    3 comments

    Submitted June 22, 2012

14. 

    GIR

    By IG-64

    Thank you for downloading the model of GIR from Invader Zim by IG-64, the maker of Stick Man and Mario models.
     
    To install: Just extract the .pk3 to your base folder.
     
    My in-game name is =GoW=Game&Watch.
     
    Very Special Thanks to: Mike Windu for the cool sounds 8)
     
    Enjoy!
    

    240 downloads

       (1 review)

    0 comments

    Submitted June 22, 2012

15. 

    Stick Man

    By IG-64

    Note: The v3 fix is included in this model.
     
     
    V 3.0 Updates are, completely remodeled, added gold and silver, added good (saint) and evil (devil).
     
    To achieve these options:
     
    /model stick_man/gold
    /model stick_man/silver
    /model stick_man/good
    /model stick_man/evil
     
    and for refrece sake of what colors there are from v2:
     
    Aqua, Blue, Brown, Cyan, Gray, Green, Orange, Pink, Purple, Red, White, Yellow, and Default (black)
     
    Enjoy
    

    384 downloads

       (2 reviews)

    0 comments

    Submitted June 22, 2012

16. 

    Neo & Morpheus + Katana

    By Salvation

    Wow...its been a while, and these things have been sitting on my computer for years now. I'm sure the JK3 community is all but dead at this point, and many will probably hate me for having not released these at a time when people actually cared, so I guess it's a good thing that I care little. So here you have it, Neo, Morpheus, and the Katana, all done for the TMU mod that has been dead now as predicted by many. If you need to be reminded how to install, throw them in the Jedi Academy base folder and i think thats it. It should be noted that these are unfinished with the exception of the katana. The player models have no sound, have shading problems, and I think may not even have team color support (it was a long time ago). So if you want to fix that, go for it, credit where appropriate. Have fun guys.
    

    1,060 downloads

       (3 reviews)

    1 comment

    Submitted June 22, 2012

17. 

    Pyramid Head

    By JKHub

    Author: Kyross
     
    A request on the forums that I took up as a first attempt at playermodelling. I think it came out alright, though it gave me some hard times. Many thanks to Lightsource for his making all the textures and the bonus wallpaper included, as well as some tips with weighing.
     
    Despite taking so long due to my general slowness and incompetence, I think it's a fair first attempt. I'd like to apologise to the forum-goers who were interested for taking so long and to Lightsource who put up with me. There is a slight clipping issue with the game versions helmet to the shoulder, and his waist has some pokey deformations. As of this versions the shoulders also have seams.
     
    Includes bot support, team skins, custom sounds, npcs and new weapons. The weapons are quite powerful for the npc, but will slow you down and can be hard to use. Especially the spear, which has a small blade. The NPCs I couldn't get to stop jumping, but they should make for a good challenge either way. They are:
    pyramidhead
    pyramidheadspear
    pyramidheadmovie
    
     
    All sounds taken from the Silent Hill movie.
    

    500 downloads

       (4 reviews)

    0 comments

    Submitted June 21, 2012

18. 

    Futurama PC Pack

    By Ambrom

    Prepare for future with this very actual model Pack! Featuring Bender, Fry, Leela, with english and french sounds, and.. a secret npc guest! This mods also offers you to customize Fry's T-shirt : Go to models/players/Fry, pick indic.jpg.. erase the current message (or do not), place yours in the same zone, and erase the red bits. Rename the file message.jpg, and here you are.
    

    687 downloads

       (3 reviews)

    2 comments

    Submitted June 21, 2012

19. 

    Jane Lane

    By Ambrom

    For all the people not remembering/knowing "Daria", Jane Lane is the best friend of Daria, heroin of the series (Mtv, circa 1999-2002-3.. ). And.. here is the model!
    

    187 downloads

       (3 reviews)

    2 comments

    Submitted June 21, 2012

20. 

    Clone Wars "Cartoon" Player Models Pack

    By Psyk0Sith

    This pack features the main characters (15 of them) from the cartoon network tv series Clone Wars. All in cel-shaded style or at least the closest thing that can be done with this game engine.
     
    The game models and textures in this pack are copyrighted to Psyk0Sith, Monsoontide (and Omeewan), © 2004, 2005
    *Durge and Asajj Ventress made by Monsoontide, Obi-Wan & Troopers textured by Omeewan.* Used by permission.
     
    This pack contains sound samples from the clone wars cartoon tv series, characters and sounds are copyrighted to:
    Lucasfilm Ltd. © 2005 Lucasfilm Entertainment Company Ltd. or Lucasfilm Ltd. & ® or ™ as indicated. All rights reserved.
    

    1,613 downloads

       (14 reviews)

    6 comments

    Submitted June 21, 2012

21. 

    Jack Skellington

    By Psyk0Sith

    As requested by Eggman_DR This is Jack Skellington from the Tim Burton movie: A nightmare before christmas, enjoy.
    

    617 downloads

    • holiday
    • halloween
       (4 reviews)

    3 comments

    Updated December 20, 2013

22. 

    Riku

    By JKHub

    Author: Tryforce
     
    What you might see is a Model wich is based on the Anime/Video Game Kingdom Hearts. His name is Riku. he a main Character in the Story. What I´ve done is the Ansem Version and the BLindfolded Version, you also get his souleater. (wich is verydetailles, im sorry)
    

    542 downloads

       (2 reviews)

    0 comments

    Updated June 21, 2012

23. 

    IG-88

    By LastWish

    IG-88 Player model.
    

    698 downloads

       (3 reviews)

    0 comments

    Updated August 13, 2014

24. 

    Happiness

    By LastWish

    Why did I make this?
    

    88 downloads

       (2 reviews)

    0 comments

    Updated August 13, 2014

25. 

    AT-ST

    By LastWish

    This is the AT-ST vehicle made over to a player model O_o.
    Npc Support, Team support, bot support, sounds and sp support, all included.
    

    291 downloads

       (2 reviews)

    1 comment

    Submitted June 19, 2012