Inyri

This is a model of the *FF7* Buster Sword used by Cloud. It is *not* a representation of the Kingdom Hearts Buster Sword or the Advent Children Buster Sword. It is modeled after the buster sword seen in the game Final Fantasy 7, with a bit of my own detailing.

You all should know this fighter from Episode III: Revenge of the Sith. It is the fully automated droid starfighter flown by... well, no one, because they're automated. But these fighters were employed by the CIS to combat the ARC 170 fighter, and they did so quite well.

This pack contains six weapons featured in the PS2 game Final Fantasy X, all of which were wielded by the main character, Tidus.

This is a pack of some of my favorite melee weapons - not just swords! - that I've modeled over the months. It includes some swords I've arleady released, like both of Aribeth's swords from Neverwinter Nights, and some new never-before-released material, such as three Kit Rae swords.

The R41 Starchaser is a starfighter comparable to the Z-95 Headhunter. In fact the R41 was created to directly compete with the Z-95 for king of the low-budget starfighters. It was slightly faster and slightly more powerful, thus making it a popular choice for smugglers, pirate, and criminal organization, such as Black Sun. Because of its status as a budget fighter, the R41 is generally "personalized" by whoever is using it. The producers of the R41, Heorsh-Kessel Drive Inc, creates them this way, so everything from the armament to the hyperdrive can be customized by the buyer. As a result almost no two R41 Starchasers are quite the same.

I came up with a concept for a hilt that showed a 'window' into the inner workings of a lightsaber. After some research, I created what I believe to be an accurate representation of some of the parts of the lightsaber: the primary and secondary focusing crystals (and their mounts), the energy channeler, and the right and left energizers. There is also a second blade (which is untoggleable) that runs through the focusing crystals.. This is the beam that eventually becomes the larger blade we all see jutting out of lightsaber hilts. An optional overwrite (of the saber single_1) is also included. If you decide you want it to overwite a different saber, do the following: Open saber_forge_overwrite.pk3 and extract single_1.sab from ext_data>sabers Change the file name to single_x.sab (x being the number you want to overwrite) Open the file and change the first line which says "single_1" to "single_x" where x is once again the number you want to overwrite Save and place back into the PK3

So I'm sure you're saying "oh man, not *another* Thrawn skin". And for the most part you're right on the money - it's basically the same skin that's been relased over and over and over. However I like to think I've added a couple of features that you haven't seen before. Feature 1: An authentic Thrawn taunt from LucasArts' TIE Fighter. Feature 2: A new face, so Thrawn is no longer the Chiss bartender wearing a Grand Admiral suit. The face was done completely from scratch, which took the majority of the time. The rest of it's mostly a recolor, as there's really no point in doing it any other way. The rank on the uniform should be accurate, however, which is another thing a lot of Thrawn skins lack.

It's a saber hilt with a more sleek look to it. Smaller, it would probably look best as dual, but works fine as a single. There are two versions - one which is completely chrome, and one which is trimmed with electrum. The chrome shader used on these hilts has been tailored specifically to the hilts, because I found the default chrome shader to be inadequate.

This is the Oathkeeper keyblade as seen in the Disney/Square game Kingdom Hearts.

This is the Kingdom Key keyblade as seen in the Disney/Square game Kingdom Hearts.

For those of you who have played the original Neverwinter Nights campaign, you may recognize the basic layout of this map. It is loosely based on the Peninsula District Prison in the city of Neverwinter, as seen in the excellent game Neverwinter Nights. It's by no means exact, but it's similar enough that I felt secure in naming it after the facility. It features two levels -- the top level contains six cells plus a main area, and the lower level contains many cells and one central room. The lower level has a very low ceiling, but the main room of the upper level has a pretty high ceiling. Just watch out for the many torches -- they hurt!

This is the Oblivion keyblade as seen in the Disney/Square game Kingdom Hearts 2.

Those familiar with the games of the Kingdom Hearts series should recognize this as Roxas from Kingdom Hearts 2. Roxas is --------------------------------------------- and there's the entire story! Oops, seems I left something out... Well, I wouldn't want to spoil anything for anybody, so you'll have to find out yourselves who his is and what his role is . In addition to the Roxas player model, both of the required keyblades are included (Oathkeeper, new and hopefully improved, and Oblivion -- both contain updated soundsets which, I believe, sound awesome). Both keyblades have backhanded versions, which I'm sure some of you will enjoy. Keep in mind, though, that the blades are also backwards, so whilst they will look cool, they aren't quite as practical. If you have previous versions of either of these two keyblades, you can delete them, burn them in a fire, serve them for dinner, etc.

This hilt has cortosis ore blades in mind, to combat the deadly effects the ore has on lightsaber blades, but is ideal for any Jedi or Sith favoring close-quarters combat in addition to lightsaber combat. In a pinch, the blade can be deactivated and the hilt can double as a melee weapon. As a result, however, the hilt requires a special protective holster. The hilt itself has four long, thing blades protecting the central lightsaber blade. The blades themselves are made of cortosis alloy, protecting them from other lightsabers, but as a result they are very susceptible to damage from other melee weapons. They are used as a last resort rather than a main attack. The hilt features several aesthetic additions. These include pulsating red and blue strips down the four grips, and the bottom pommel area, as well as an electric current running down the inner portion of the hilt. Both of these make full use of dynamic glow, so you may not get the full effect if you have dynamic glow turned off, or can not use dynamic glow. This hilt also features a custom hum sound, which is a mix of two baseJKA sounds. It should not be terribly annoying, however, as the change is somewhat subtle (I hope).

I've always been very interested with medieval and older times. I had at one time dreamt of a mod of such a thing. I've realized that probably won't happen, but in the mean time I felt like releasing these models for public use, in case it spurs some properly themed maps. They are free for use (see Distribution Notes for more info). Bare in mind that certain of the models (targets, campfire, and dummy) are better suited with a modelscale of approximately 1.5. The rest seem adequately sized, unless you prefer a larger tent .

It's a crossbow. It should have most, if not all, of the appropriate parts, as I tried to make it as accurate as possible. It also actually fires bolts (for the uninformed, these are like arrows... except bulkier). This replaces the blaster rifle.

This is a model of the Final Fantasy 12 variant of the Buster Sword, as wielded by Gilgamesh in the 'Ancient Man of Mystery' hunt. It is very similar to the Final Fantasy 7 version, but with some minor details. It has been made to look as similar to the original version as possible, given the restrictions of the engine, and I attempted to keep the polycount as low as possible without sacrificing too much of the detail.

Swoops are fun, but I needed something new. So suddenly it occured to me that a hoverboard, as a swoop replacement (or even its own vehicle) would be really cool. And so a little hoverboard was born! It hovers, it glows, it hums, and it sinks in water (for those who were worried!).

Three weapon models as seen in the game Final Fantasy X-2: Yuna's 'Tiny Bee' pistol (blaster pistol replacement), Rikku's thief knives (3 color variations), and Paine's sword. Yuna's gun includes custom icons and custom strings, so if you have another mod that uses sp_ingame.str you may have compatibility issues. The easiest solution is to delete this file from ffx2_if.pk3, as it's not a requirement for the mod to work (it's just an extra I thought folks might appreciate).

This weapon is the weapon of Zasalamel from Soul Calibur 3. To get it out in the clear, I've never played Soul Calibur 3... or 2 or 1, for that matter. It has darn cool weapons, though. I'll give it that.

Back in the heyday of the JK series, things were better. Nicer. Prettier. Well, this map may not be prettier, but it's a tribute to Dark Forces 2, the granddaddy of Jedi Academy. This map features the multiplayer version of the Valley of the Jedi Tower, where Kyle Katarn faces and destroys Maw during the JK1 SP campaign. This map was completely for the Jan-Feb '07 JKFiles Mapping Contest, for the intermediate skill level.

I love Knights of the Old Republic. It's a great game, and I think it needs some JA lovin'. However I'm very much anti-ports, so I'm hoping these original models, made from scratch over several weeks, will prompt mappers to take the ball into their own court and produce some excellent replicas using their own work. Included Models: Workbench Computer console Three storage containers Kolto tank Hangar thing from Davik's estate

I don't expect a lot of people to know what this is or appreciate it, but those of you who *do* know what it is should enjoy it. This is the Shrike, Mara Jade's starfighter as seen in the Jedi Knight expansion Mysteries of the Sith. It's an Alpha-52 starfighter, loaned to her by Talon Karrde. I've tried to keep it accurate to the original model (check it out on wookieepedia if you aren't sure what it's supposed to look like) but I did take some slight liberties with the texture where original detail was hard to see and/or my 'accuracy' made it look dumb.

Well, jedikiller just recently made a noghri skin with an animal-type theme, and seeing as how I can't resist tiger textures I decided to follow suit. This skin comes with BOT, team, and fuzzy kitty sound support. No NPCs this time, unfortunately.

This replaces the default Rodian model in multiplayer with a version with no vest (without having the big gaping hole in his back, for those of you who have tried this). It makes use of a .SURF file to surf the back mesh back on to avoid this error. This is *really* more of a modder's resource than a skin, but you can naturally use it as a skin if you want. You may want to change the pathways and such so it doesn't *actually* overwrite the rodian, unless you don't care...