Inyri

This is a pack of some of my favorite melee weapons - not just swords! - that I've modeled over the months. It includes some swords I've arleady released, like both of Aribeth's swords from Neverwinter Nights, and some new never-before-released material, such as three Kit Rae swords.

You all should know this fighter from Episode III: Revenge of the Sith. It is the fully automated droid starfighter flown by... well, no one, because they're automated. But these fighters were employed by the CIS to combat the ARC 170 fighter, and they did so quite well.

For those of you who are Dungeons & Dragons fans, Neverwinter Nights fans, or just fantasy fans in general, this is a little guy we like to call a kobold. Kobolds are portrayed differently by different people, but this is a version leaning more towards D&D, based heavily on Neverwinter Nights with modifications to fit the Jedi Academy skeleton.
 
If you have played Shadows of Undrentide or Hordes of the Underdark, you may recognize this model's sounds as being those of the kobold bard Deekin. I wasn't planning on using his sounds at first, but due to popular demand (and he just sounds so funny) I decided to use them anyhow, so a BIG thanks to BioWare. We love you, BioWare.

A lot of you, as I know, don't have a clue what this fighter is or where it came from. It was originally from an early Star Wars game, Rebel Assault II, made in 1995. It's actually a pretty good game, but the fighter always made me drool and I've been semi-obsessed with it ever since. Several good models have been made for X-wing Alliance, but I decided Jedi Academy needed one too, and the current model of it is just so insufferably inaccurate that it made want to pull all of my hair out and donate it to the bald.
 
V-38 and Phantom variations are included (see comments section for more information on the special features of the Phantom variation).
 
This TIE, classified as an assault fighter due to its heavy weaponry, shields, and hyperdrive, has a three-pronged wing arrangment. It sports three wing-tip laser cannons and two chin-mounted cannons, generally used as ion cannons. Its hyperdrive is outfitted such that it can make only a few short jumps if need be. During one of Lord Vader's failed campaigns, a modified version of this fighter, called the TIE Phantom, was put into mass production. This fighter, while less powerful in armory, had the added bonus of a fully functional cloaking system which rendered it next to invisible to most scanners. Before the TIEs could reach their full potential, however, two Rebel agents destroyed the production facility the TIEs were being produced at. All of these Phantom TIEs were believed to be destroyed.

This model is rather self-explanatory once you look at it. It's a player model of a cat-person. That is a humanoid feline. It comes in three different flavors: Puma (default), Panther (blue team), and Tiger (red team).

This is a model of the Red Power Ranger from the series Mighty Morphin' Power Rangers. If anyone out there has never heard of this series... I pity you immensely. I used to watch it when I was probably about 7 or 8 years old, so out of the blue one day I decided to model the Red Ranger. No particular reason, I just did.

This is Yun's lightsaber from the game Dark Forces 2: Jedi Knight. I made it from only one reference picture, so I hope it's accurate. It features a chrome shader as well as a specular shader, so there should be no lack of shininess.

This is a group of 9 weapons based on the game "Final Fantasy X," including 6 new sabers and 3 demolitions weapons.
 
INCLUDED WEAPONS:
Tidus's Longsword (with staff variant)
Tidus's Brotherhood
Auron's Katana
Yuna's Nirvana
Kimahri's Spiritlance
Rikku's Claws (dual sabers)
Lulu's Pupu (detonation pack)
Wakka's Blitzball (thermal detonator)
Sphere (trip mine // laser trap)

SP SABER COMMANDS:
Tidus's Longsword > tidus_longsword, tidus_longsword_staff
Tidus's Brotherhood > brotherhood
Auron's Katana > auron_katana
Yuna's Nirvana > yuna_nirvana
Kimahri's Spiritlance > spiritlance
Rikku's Claws > rikku_claw (right hand only), rikku_claw_left (left hand only)

FIXES DURING BETA:
Fixed several soundsets which were "off" due to copypasting.
Fixed several shaders.
Fixed an error with plane transparency on Kimahri's Spiritlance thanks Trauma.
Fixed the blitzball soundset to reflect the consistency of a blitzball rather than a metal thermal detonator.
Fixed several sabers which did not bounce off of the architecture.
Fixed the hilt color of Auron's Katana to reflect ingame photos rather than the artist rendering.
Fixed several missing/incorrect sounds.
Fixed thermal detonator belt now reflects the blitzball.

Well I got bored making music video-style videos for Jedi Academy, so I thought a little uniqueness was in order. This video is a combination of filmed action from Jedi Academy and photoshopped frame-by-frame sections. The video was meant to, as accurately as possible, give Jedi Academy that Final Fantasy VII feel.
 
To compelete the "FF7 Look" the Cloud/Sephiroth models have been used, as well as the Advent Children Weapons Pack. The good old-fashioned FF7 battle theme might make one believe they were really watching a FF7 gameplay clip instead of a Jedi Academy video. And what Final Fantasy battle is complete without the ever-present victory fanfare?
 
At the end of the battle you will come to the experience screen, but here in Jedi Academy things are a little.... different.

The main skin was originally for a mod I was making, but I don't think it's ever going to be released so I'm just releasing the skin as-is. This is basically just a normal guy - his outfit consists of jeans, a sweatshirt, and let's not forget some brand-name sneakers (with the brand name removed... of course ). In addition to the main skin there's a second joke-ish skin. When I finished it it gave me the impression of a suburbanite out mowing his lawn... Have a good laugh with it
 
NPC Instructions: This skin has both friendly NPCs and enemy NPCs. The friendly NPCs have the same amount of health as the Kyle NPC does, so rest assured they won't die right away. To spawn an NPC in singleplayer, bring down your console and first type "helpusobi 1" to enable cheats, then type "npc spawn" with the appropriate name. The two NPC names are listed below.
 
Friendly NPC:
averagejoe_ally
averagejoe_summer_ally
 
Enemy NPC:
averagejoe
averagejoe_summer

I’ve been rather bored with game modding lately, so I decided to spice things up by making a model and asking members of the community to submit skins for it in the form of a pseudo-contest. The model is of a dwarven sword and there are twelve included variants total, each named by author.
 
Thanks to the following people for participating: Ambrom, Jalechah, megaman295, Posezion, Raschu, reelo2228, SH()CKER, Sithmaster 555, Soleutator, stotto, yodaman123

This is a port of my Westar Pistol model for Knights of the Old Republic. Jango Fett’s iconic weapon is now available in JK3! Be wary, though: if you want to wield two of these bad boys you’ll need a mod that allows you to do this. The model is just a blaster pistol replacement!

My very first released mod was this skin — a composite armor skin. It was made with the shadowtrooper model and was photosourced from game screenshots.

There isn’t a good model to make Altair with, but I did feel motivated to make a hoodless variant of the assassin robes with the human male Jedi model. It’s very simple, but kind of has that feel to it. Also if you prefer colored robes, you can color the white portion of them through the in-game customization.

This is a model of a pickhammer, one of the variety of weapons that can be found in the game Fable: The Lost Chapters. There are two different versions of the weapon included: the steel pickhammer and the master's pickhammer. Both models are completely custom made, from mesh to texture, using Fable assets as reference material only. These blades use default sword sounds from the base game and are not throwable (it's a big steel hammer - it's heavy!).

This is the T-21 light repeating blaster, also known as the T-21 rifle in Star Wars Galaxies (no worries, I didn't base it off of that). It was a large and very powerful blaster used by Stormtroopers. This particular gun replaces the concussion rifle, because based on its description that seemed to be the most realistic replacement. It includes new icons as well as new strings.

I originally intended to do a tree pack, but I really dislike trees in general. I never was a big fan of botany. As a result, all that ever got finished was this pine tree. It is a single pine, which I tried to make as efficiently as possible to reduce unnecessary lag when used. It's very simple, but doesn't look too bad, all things considered.

This pack contains five map objects, all of which are instruments seen throughout the Star Wars Universe. SWG players will recognize these as instruments from the game, however they are also prominently displayed in film and other EU sources. The nalargon in particular is a mixture of canon and SWG styles. All wind instruments include a straight up and down version, and a leaning version.

I love Knights of the Old Republic. It's a great game, and I think it needs some JA lovin'. However I'm very much anti-ports, so I'm hoping these original models, made from scratch over several weeks, will prompt mappers to take the ball into their own court and produce some excellent replicas using their own work.
 
Included Models:
Workbench
Computer console
Three storage containers
Kolto tank
Hangar thing from Davik's estate

I've always been very interested with medieval and older times. I had at one time dreamt of a mod of such a thing. I've realized that probably won't happen, but in the mean time I felt like releasing these models for public use, in case it spurs some properly themed maps. They are free for use (see Distribution Notes for more info). Bare in mind that certain of the models (targets, campfire, and dummy) are better suited with a modelscale of approximately 1.5. The rest seem adequately sized, unless you prefer a larger tent .

This is a model of the Final Fantasy 12 variant of the Buster Sword, as wielded by Gilgamesh in the 'Ancient Man of Mystery' hunt. It is very similar to the Final Fantasy 7 version, but with some minor details. It has been made to look as similar to the original version as possible, given the restrictions of the engine, and I attempted to keep the polycount as low as possible without sacrificing too much of the detail.

This sword was made as a request from the JK series boards at FileFront’s forums. Little did I know at the time that the weapon is actually from Bleach, else I might not have done it, but here it is anyhow.

This lightsaber hilt was requested of my by the user Raven, on my forums. I decided to go ahead and build it for him, so here it is. No special attributes, just a good ol’ hilt for your enjoyment!

This was a requested model that I decided to make, since I was bored. It’s basically just a stylized katana hilt serving as a lightsaber hilt, with the blade coming out where the metal blade would.

This pack includes three of Zidane Tribal's staves from Final Fantasy 9: The Ogre, Exploda, and the Butterfly Sword. Each are somewhat stylistically different from their originals to look less cartoony and fit in better to Jedi Academy.