Jump to content

Modview issue


Recommended Posts

Posted

For some strange reason, whenever I load up a model in Modview, the model itself is not visible. There are no error messages, it seemingly loads normally, apart from the obvious.

 

I have tried re-downloading Modview, to no avail. All my pathing is correct, the skins for the model appear in the menu just fine, just that nothing is visible.

 

Someone thinks it might be because of my monitor resolution; which is set at 1366 x 768.

 

Any help would be appreciated.

Posted
  On 12/7/2015 at 10:32 PM, mrwonko said:

I think it probably has nothing to do with your resolution, but I can't tell what causes it. Are your drivers up to date?

 

As far as I am aware, everything is up to date.

Posted
  On 12/7/2015 at 11:26 PM, eezstreet said:

Check the options at the top and in any of the menus. Make sure there's nothing there that is hiding your model.

@@Xycaleth has an updated version of ModView. Perhaps you can try that one?

 

Which ones could be responsible for hiding the model? Also I'd be willing to try an updated version, provided Xycaleth is willing to share.

 

 

  On 12/7/2015 at 11:25 PM, Archangel35757 said:

Turn off invisible mode

 

 

...just kidding.

 

HAHAHA! I wish!

Posted

The updated ModView is in the file center.

And I wouldn't know off the top of my head which setting would be responsible. Try them all if you have to.

Posted
  On 12/7/2015 at 9:46 PM, linken233 said:

For some strange reason, whenever I load up a model in Modview, the model itself is not visible. There are no error messages, it seemingly loads normally, apart from the obvious.

 

I have tried re-downloading Modview, to no avail. All my pathing is correct, the skins for the model appear in the menu just fine, just that nothing is visible.

 

Someone thinks it might be because of my monitor resolution; which is set at 1366 x 768.

 

Any help would be appreciated.

Which models You tried to view? The default JKA ones? Or Your's models ? The models must be made from triangles.

Posted
  On 12/7/2015 at 11:42 PM, eezstreet said:

The updated ModView is in the file center.

And I wouldn't know off the top of my head which setting would be responsible. Try them all if you have to.

I tried the updated Modview, no luck. Provided this is the one here. http://jkhub.org/files/file/90-modview/

 

Also I've checked/unchecked all of the options in the View dropdown, no luck either.  :(

 

  On 12/8/2015 at 12:04 AM, Langerd said:

Which models You tried to view? The default JKA ones? Or Your's models ? The models must be made from triangles.

 

Highly popular models that I'm skinning. Specifically the female customization and HS Anakin (w/ Spanki Jedi Customization). I have tried with base jka, same result.

 

I'm providing some screenshots of my view dropdown, if anything looks out of the ordinary, please let me know

 

Screen1_zpsozpcv0jf.jpg

 

Screen2_zpsrr1zvaz0.jpg

Posted

Also, make sure that shaders are removed for the model if you have copied them into ModView's base. Shader support is still buggy in ModView, and this could be why the model fails to display.

Posted
  On 12/8/2015 at 4:35 AM, Cerez said:

Also, make sure that shaders are removed for the model if you have copied them into ModView's base. Shader support is still buggy in ModView, and this could be why the model fails to display.

 

 

None of the models have any shaders, I've never understood them really so I just delete all of them. I copied the base shaders into the modview base just to stop that one annoying error message.

Posted
  On 12/8/2015 at 4:40 AM, linken233 said:

I copied the base shaders into the modview base just to stop that one annoying error message.

Have you tried removing them temporarily and seeing if the model shows up then?

Posted

Customization might not have a proper default skin; usually most surfaces will be *off. Try selecting a skin in the outliner on the left.

Posted
  On 12/8/2015 at 4:51 AM, Cerez said:

Have you tried removing them temporarily and seeing if the model shows up then?

 

Yes, no luck I'm afraid.

 

  On 12/8/2015 at 8:33 AM, mrwonko said:

Customization might not have a proper default skin; usually most surfaces will be *off. Try selecting a skin in the outliner on the left.

 

Done it, no luck either.

Posted
  On 12/8/2015 at 5:08 PM, Psyk0Sith said:

File>Reset/Zero model view position

 

View>openGL info (look for any error messages)

 

I did as you said, no change unfortunately, but I took a screenshot of the openGL info. Do any of those look like error messages?

 

Screen3_zpsry2jvgiy.jpg

Posted
  On 12/8/2015 at 5:30 PM, Cerez said:

Eesh, Intel HD! It's making me cringe... >.<' But it should work, nonetheless...

 

Sorry, it's a crappy laptop.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...