Jk2 Nar shaddaa ship func_train?

[Langerd]

Everybody remember this ship that was flying from the pit in narshadda street map? It was flying very smooth and i always wanted to make the same effect. But i have some problems with func_trian . Any ideas how to make it like this ?

This is the model :

[Ramikad]

You can try with linear 1 to make it move linearly, as well as setting speed manually at every path_corner if you need it to make it look better. Also check in turn_train, so that it won't move through path_corners with fixed angles.

[Langerd]

You can try with linear 1 to make it move linearly, as well as setting speed manually at every path_corner if you need it to make it look better. Also check in turn_train, so that it won't move through path_corners with fixed angles.

I used but it stops for a second in the path corner.. and GO to the next and again it stops for a while...

even i gave all path corners wait - 0 and speed spawnflag to 1000 (while train speed is 500) it still stops. Probably because in gtkradiant it is written like this:

 

TURN_TRAIN    func_train moving on this path will turn to face the next path_corner within 2 seconds

 

[Ramikad]

Forgot to specify, you have to set the linear 1 on the func_train, not the path_corner.

[Langerd]

Forgot to specify, you have to set the linear 1 on the func_train, not the path_corner.

@Ramikad I am suppose to write it as the spawnflag D: ? Because i cant select it in Func_train because there is no flag like this to check :/

 

MY BAD it is . I will check it and compile my map.

Edited March 8, 2015 by Langerd

[Ramikad]

It's not a check, it's a value.

 

LOOP - if it's a ghoul2 model, it will just loop the animation
PLAYER_USE    Player can use it with the use button
INACTIVE    must be used by a target_activate before it can be used
TIE  flying Tie-fighter hack, should be made more flexible so other things can use this if needed

A train is a mover that moves between path_corner target points.
Trains MUST HAVE AN ORIGIN BRUSH.
The train spawns at the first target it is pointing at.
"model2"    .md3 model to also draw
"modelAngles" md3 model's angles <pitch yaw roll> (in addition to any rotation on the part of the brush entity itself)
"speed"        default 100
"dmg"        default    2
"health"    default 0
"noise"        looping sound to play when the train is in motion
"targetname" will not start until used
"target"    next path corner
"target3" what to use when it breaks
"color"        constantLight color
"light"        constantLight radius
"linear" set to 1 and it will move linearly rather than with acceleration (default is 0)
"startframe" default 0...ghoul2 animation start frame
"endframe" default 0...ghoul2 animation end frame

[Langerd]

It works!!! Thank You! But better create many path corners or less to create smooth flying ?