Eternal

I'm a little confused by this section in the serverark.conf

# Network:

# No default, you MUST specify this!

# This is the IP address (or address/bits for multiple addresses) on which

# ServerArk will monitorUDP packets. For example, if you have 1 address,

# simply enter it. If you have several, then enter the address/bits pair.

# For example, 192.168.1.0/24 covers all addresses that match 192.168.1.X,

# and 192.168.0.0/16 covers 192.168.X.X addresses.

# The libpcap filter used by ServerArk is 'ip and udp and dst net network'

Now it says to just enter the server's ip address if you just have 1 address. 192.168.1.0/24 would cover every ip address after the 1 (192.168.1.X). What if you only wanted to protect 2 IP addresses though, what would you enter then?

Tried going the Ubuntu route and had the same result :/ You're right Mysterious Stranger, running servers does require a lot of patience.

Nope, didn't work.... oh well

Would it be a possibility that perhaps Ubuntu would do a better job at this than my current Debian? Maybe Ubuntu can handle ports better? I'm not really sure of the differences between those 2.

I guess I could find a script to make the VPS restart as well o.o and have the jka servers run on start-up!

Using an auto-restart script ^^

But not the 400+ that don't show up.

Yeah we need a new master server.

At best you could give it a few hours...sometimes it appears on its own later, usually between an hour to three days. Anymore than that change the port again (to something ridiculous like 30000?) and restart the vps if it still doesn't show (but there's always a risk of both servers not showing up) but don't spam it. Restarting it a trillion times (like I did) made mine go invisible but it's up to you might get lucky...

 

If you get both servers to show up again leave them or they'll go poof again...

 

Idk why if it's more than one server using the same ip this 'bug' happens, perhaps the master list thinks it being spammed from that ip, but that's just what I think I'm no techie.

 

Anyone else using vps/dedi's? Would be good to share experience, esp about hosts, etc...?

Lots of luck involved... and I haven't had much :/ When I did have both servers showing, I did nothing to them after, but come next day and one of em is gone :'(. I guess it happened after the automatic server restart :/

Using a VPS here. Running on port 29070, all outbound traffic from jampded.exe allowed on firewall, traffic from port 29070 allowed on TCP/UDP allowed and still nothing.

Oh wow, I guess I'm lucky to get at least one on the list.

It is? (on both counts)

 

Also, relevant: http://jkhub.org/top...-internet-list/

 

Are you running any DDoS protection kind of scripts?

Like I said, I've tried putting both up after a fresh install of debian. No DDoS protection or anything... yet.

Call me crazy but I don't use anti-virus at all on my windows system and I've been perfectly fine. ^^ The only security I have is Windows Firewall

I'm trying to host a couple of Jedi Academy servers off of my virtual private server with the same IP but different ports. For some reason only one server (Server 1) is visible on the master list. I'm able to connect to the other server (Server 2) and it's also visible on my Favorites list if I were to add it there. I've tried switching up the ports, and that causes Server 2 to be visible in master list while Server 1 becomes invisible. The ports I'm using are 29070 (Visible) and 29071. I've also tried re-installing the OS (debian) on the server and loading just Jedi Academy servers. When I did that and started up Server 2 first with port 29071, it became visible, but Server 1 with port 29070 became invisible. I was also able to get both servers to be visible on master list last night, but today only Server 1 shows up while Server 2 is still playable but invisible in master list. I have no idea how I made both servers visible for that short amount of time, as at that time I was just messing with the ports, switching them around. I've tried messing with the ports today but had no luck. Does anyone have any idea on how to get 2 JKA servers with the same IP to show up on the Master Server list?

P.S. I'm using the assets3 and linuxjampded provided by Caelum in his Server guide. A friend of mine, Valar, was able to get his jka servers to show up on the master server list with different ports using the same assets and linuxjampded. I've asked him about this issue, but he has no idea what's going on with my server. Although, 1 major difference I should note is that he's running Ubuntu on his server while I'm running debian, I don't know if that would be causing the issue?