Jump to content

Jamme capture pipe function


Recommended Posts

Posted

Hello,

I was trying the pipe capture function to rec videos in mp4 format...

I installed FFMPEG and placed "ffmpeg.exe" file in gamedata folder.

When I try to record the demo by typing the /capture pipe command, i get in console FS_write: 0 bytes written.

As the line in console says, the video has not been recorded at all.

What am I doing wrong? Thank you for the support,

Punisher.

Posted

Hello again, yeah i got it , here's what's written :

 

 

ffmpeg version N-85750-ga75ef15 Copyright © 2000-2017 the FFmpeg developers

  built with gcc 6.3.0 (GCC)
  configuration: --enable-gpl --enable-version3 --enable-cuda --enable-cuvid --enable-d3d11va --enable-dxva2 --enable-libmfx --enable-nvenc --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable-libxvid --enable-libzimg --enable-lzma --enable-zlib
  libavutil      55. 61.100 / 55. 61.100
  libavcodec     57. 93.100 / 57. 93.100
  libavformat    57. 72.101 / 57. 72.101
  libavdevice    57.  7.100 / 57.  7.100
  libavfilter     6. 88.100 /  6. 88.100
  libswscale      4.  7.101 /  4.  7.101
  libswresample   2.  8.100 /  2.  8.100
  libpostproc    54.  6.100 / 54.  6.100
[avi @ 00000000004c7fc0] Stream #0: not enough frames to estimate rate; consider increasing probesize
Guessed Channel Layout for Input Stream #0.1 : stereo
Input #0, avi, from 'pipe:':
  Duration: N/A, start: 0.000000, bitrate: N/A
    Stream #0:0: Video: rawvideo, bgr24, 1920x1080, 30 fps, 30 tbr, 30 tbn, 30 tbc
    Stream #0:1: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz, stereo, s16, 1411 kb/s
Stream mapping:
  Stream #0:0 -> #0:0 (rawvideo (native) -> h264 (libx264))
  Stream #0:1 -> #0:1 (pcm_s16le (native) -> aac (native))
[libx264 @ 00000000004ccd80] using cpu capabilities: MMX2 SSE2Fast SSSE3 SSE4.2 AVX XOP FMA4 FMA3 LZCNT BMI1
[libx264 @ 00000000004ccd80] profile High 4:4:4 Predictive, level 4.0, 4:4:4 8-bit
[libx264 @ 00000000004ccd80] 264 - core 148 r2762 90a61ec - H.264/MPEG-4 AVC codec - Copyleft 2003-2017 - http://www.videolan.org/x264.html - options: cabac=0 ref=1 deblock=0:0:0 analyse=0:0 me=dia subme=0 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=6 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=250 keyint_min=25 scenecut=0 intra_refresh=0 rc=crf mbtree=0 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=0
frame=   12 fps=0.0 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   22 fps= 21 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   32 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   42 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   52 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   62 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   73 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   84 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=   94 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=  105 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=  116 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
frame=  127 fps= 20 q=0.0 size=       0kB time=-577014:32:22.77 bitrate=  -0.0kbits/s speed=N/A    
Too many packets buffered for output stream 0:0.
[libx264 @ 00000000004ccd80] frame I:1     Avg QP:20.00  size:511032
[libx264 @ 00000000004ccd80] frame P:128   Avg QP:20.16  size: 39090
[libx264 @ 00000000004ccd80] mb I  I16..4: 100.0%  0.0%  0.0%
[libx264 @ 00000000004ccd80] mb P  I16..4:  1.7%  0.0%  0.0%  P16..4: 21.8%  0.0%  0.0%  0.0%  0.0%    skip:76.5%
[libx264 @ 00000000004ccd80] coded y,u,v intra: 79.6% 41.9% 38.0% inter: 10.3% 3.2% 3.2%
[libx264 @ 00000000004ccd80] i16 v,h,dc,p: 40% 28% 22% 11%
[libx264 @ 00000000004ccd80] kb/s:10259.71
Conversion failed!

 
Honestly i'm not understanding much of it :0
Posted

Sorry for the double post but i have solved it :
I placed the exe of FFMPEG V 3.2.4.
With this version I do not have problems at all. (previously I had version 2017-05-03-a75ef15)

Thank you for the support anyways !

The mod is great :D

Posted

Yeah, you got so called "nightly" build, instead of the last official release.

It's nice it works for you now.

=SF=Punisher likes this

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...